CD Radiation Meter Range Comparison Radiation Kits Main Back to Civil Defense Museum Main		Civil Defense Radiation Meter Scale Comparison CD V-700 vs. CD V-715 & CD V-717. The purpose of this page is to try to demonstrate the large difference between the CD V-700 detection range and the CD V-715 and CD V-717 detection ranges. I first thought of doing this while browsing Ebay auctions. The endless auction listings of the Civil Defense high-range ion chamber instruments as "Geiger Counters" is the primary reason for this page. I hope some who are thinking about starting a collection of these meters will see this page first before starting to buy instruments. Obviously I think all of the CD instruments are super-cool. I have dozens of the high range instruments but beginning collectors should know that there is really nothing much you can do with the high-range instruments other than display them. I have seen ebay auctions stating that the high range instruments will detect "background radiation" and all kinds of nonsense. Here is a rough comparison between the scale ranges of a CD V-715 and CD V-700. Keep in mind this is an approximate comparison because the CD V-715 and CD V-700 detect in different ways. The info on this page is accurate to the best of my knowledge. CD V-700 on x100 range compared to CD V-715 & 717 on x0.1 range. The entire CD V-700 scale range (inset in photo) set on the x100 range (highest range for the CD V-700) is roughly equal to the first 5 scale divisions on the CD V-715 or CD V-717 scale (large scale in photo) set on the x0.1 range (lowest setting on the CD V-715 or CD V-717). A gamma source reading 20mr/hr (probe shield closed) on a CD V-700 won't necessarily translate directly to the CD V-715/717.. In other words if you have a source reading 20mr/hr on a CD V-700 you can't necessarily just stick it under a CD V-715/717 and have it read exactly on the first 2 scale divisions. NOTE: I have an old aircraft turn and bank indicator with a radium dial (seen here CD V-700 reading 10 mr/hr ) that will read 10 mr/hr on a CD V-700 with the probe closed. The reason this indicator reads so high is because it has a large (about .75 inch x 2 inch) piece of radium-painted material behind the turn and bank ball tube. I have a Landers Frary & Clark CD V-715 Model 1A that the needle will go up scale about half of one scale division when placing the turn and bank indicator under the ion chamber with the case bottom removed. The LF&C isn't calibrated but the needle does move. I've tried the same thing with 2 calibrated Victoreen CD V-715s that I have and the needles on both of those don't budge. Not that scientific of an experiment but I thought I would mention it. CD V-700 on x100 range compared to CD V-715 & 717 on x1 range. The entire CD V-700 scale range (inset in photo) set on the x100 range is roughly equal to one half of the first division on the CD V-715 or CD V-717 scale (large scale in photo) set on the x1 range. This comparison really shows the extreme difference in the CD V-700 and the CD V-715/717s.